Weston 65-0501-RT Instruction Manual download pdf (Page 11)

-11--14-

SEAL MODE

Press the SEAL Button during the

vacuuming process or when using the Pulse

Button to initiate the seal (before the preset

vacuum pressure is reached). Also used for

only sealing vacuum bags without removing

the air from the bag.

To only seal vacuum bags without removing

the air from the bag:

1. Attach the Vacuum Sealer to the power

supply.

2. Press the ON/OFF Button (Figure 11) on the Control Panel to turn the Vacuum

Sealer “ON”. The ON/OFF Button on the display will illuminate and the Internal

Cooling Fan will run.

3. Press both of the Lid Release Buttons on each side of the Vacuum Sealer to

release the lid lock, then lift the Vacuum Lid to open.

4. Fill the vacuum bag with the product to be sealed. The open end of the vacuum bag

must be clean and dry to seal properly. HINT: When lling bags, fold over the top portion

of the bag, ll the bag, then unfold the top portion to seal.

5. Place the open end of the bag onto the Vacuum Chamber Seal and slightly into the

Vacuum Chamber. The Vacuum Post cannot be blocked or covered by the bag. Make

sure there are no wrinkles or creases in the bag in the sealing area.

6. Push down and close the Vacuum Lid and lock into place. The open end of the

bag should be sandwiched between the Seal Bar Insulator and the Seal Bar Heating

Element/Seal Bar Tape.

7. Press the SEAL Button (Figure 11), this will engage the Vacuum Pump and

Seal Bar Heating Element and seal the vacuum bag. The SEAL Button on the

display will illuminate while sealing. The appliance will stop automatically and “BEEP”

when the seal process is complete.

8. DO NOT try to open the Vacuum Lid before the vacuum has released or damage

may occur. Press both of the Lid Release Buttons on each side of the Vacuum Sealer

to release the lid lock, then lift the Vacuum Lid to open.

9. Remove the sealed bag. Wait at least 20 seconds before sealing another bag to avoid

overheating the unit.

10. Press the ON/OFF Button on the Control Panel to turn the Vacuum Sealer “OFF”.

11. Disconnect the Vacuum Sealer from the power supply.

Figure 11

Control Panel

10. To test vacuum, gently tug on the canister lid. The lid should not move.

11. To release the vacuum and open the canister, turn the knob/dial on the canister to

the open position.

12. Press the ON/OFF Button on the Control Panel to turn the Vacuum Sealer “OFF”.

13. Disconnect the Vacuum Sealer from the power supply.

Some parts of the Vacuum Sealer may need

replacing after repeated use. A Maintenance

Kit (Sold Separately) (Figure 16) may be

necessary for the Vacuum Sealer to properly

function. NOTE: Remove the inner foam oval

from all of the foam Chamber Seals. The foam

oval can be discarded, only the outer foam ring

is needed (Figure 16a).

REPLACING THE VACUUM

CHAMBER SEAL:

1. Press the ON/OFF Button on the Control

Panel to turn the Vacuum Sealer “OFF”.

2. Disconnect the Vacuum Sealer from the

power supply.

3. Make sure the Vacuum Sealer is completely cool.

4. Press both of the Lid

Release Buttons on each side

of the Vacuum Sealer to release

the lid lock, then lift the Vacuum

Lid to open.

5. Remove the Vacuum

Chamber Seal (NOTE: The

Vacuum Chamber Seal DOES

NOT have an adhesive backing.)

(Figure 17) from the groove

around the Vacuum Chamber

on the base of the Vacuum

Sealer.

6. Position a new Vacuum

Chamber Seal into the groove

around the Vacuum Chamber

on the base of the Vacuum

Sealer.

7. Work the Vacuum Chamber

Seal into the groove until the

seal is completely in place.

SERVICE INSTRUCTIONS

Figure 16

Figure 17

WARNING! Before cleaning, assembling or disassembling the

appliance, make sure the appliance is OFF and the PLUG IS REMOVED

FROM THE OUTLET/POWER SOURCE!

Seal Bar

Heating

Element/

Seal Bar

Tape

Vacuum

Chamber

Seal

Vacuum

Chamber

Figure 16a

Discard

foam

ovals

Keep

Chamber

Seals

Vacuum Sealer

Maintenance Kit

NOTE: The Vacuum Sealer is ONLY intended to be used with VACUUM BAGS. For

best results, only use the recommended vacuum bags with an embossed or mesh lining.

DO NOT USE HOUSEHOLD BAGS! Any other uses of the Vacuum Sealer, other

than the uses described in this booklet, could potentially damage the appliance and void

the warranty!

1 2 ... 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Weston 65-0501-RT Instruction Manual Page 11

Comments to this Manuals

Related products and manuals for Vacuum sealers Weston 65-0501-RT